pumping unit

API 5CT Oilfield J55 2 3/8 EUE Tungsten Plating Tubing

2019-08-22 17:03:00 21

API 5CT Oilfield J55 2 3/8 EUE Tungsten Tubing

Product Description

 Due to the strong carcinogenicity and severe environmental of hexavalent chromium ions, the use of chrome plating technology in China has been gradually limited, and some products have been limited by the two directives, WEEE and ROHS from EU. Therefore, the new environmentally friendly substitution of chromium technology R & D draws more and more attention. And as a new substitution of chromium technology, tungsten alloy plating process, due to its special structure as well as good wear resistance and corrosion resistance, has been gradually focused on by people. And in the field of petroleum machinery, it has been popularized and gradually recognized by customers because of its excellent corrosion resistance (resistance to chloride ions, hydrogen sulfide). For example, electroplating tungsten alloy anti-corrosion tubing and anti-corrosion sucker rod have been in mass application in the oil field with its good condition. But the wear resistance of tungsten alloy is lower than that of electroplated chrome layer when tungsten alloy has been applied in the PDM drill, oil pump barrel and other products. We Shengji have been going for extra miles in R & D of tungsten plating, and thus we can improve anti-abrasion performance, low the porosity and, promote the protective performance of plating on substrate Besides, the new technology has successfully been used in tubing, steel barrel, PDM drill, sucker rod, copper pump barrel products, meanwhile all aspects of performance indicators have been taken by international customers.

API 5CT Oilfield J55 2 3/8 EUE Tungsten Plating Tubing

 

Specifications

 

Item

Parameter

Plating composition

Ni-72%, P-8%, W-5%, Carbide -15% (mass fraction)

Plating hardness

50-550HV (plated state), 940-1100HV (heat treatment)

Wear resistance

2-3 times better than chromium plating

Corrosion resistance

resistance to aggressive service like H2S, CO2, NaCI, HCI, etc.

Current efficiency

80% -85%

Deposition rate

35um-45um / h

Adhesion

8Kg/mm2, plating no falling under high temperature and pressure.

 

 

Tubing and Casings

rig,mud pump,rotary table,drilling swivel,travelling block hookrig,mud pump,rotary table,drilling swivel,travelling block hook

Certifications

API 5CT Oilfield J55 2 3/8 EUE Tungsten Plating Tubing 

Quality Control

API 5CT Oilfield J55 2 3/8 EUE Tungsten Plating Tubing 

Company Information

SHENGJI GROUP (formerly known as General Machinery Plant,SINOPEC) established in 1964 and restructured in 2007, covers an area of 158 acres, 1500 employees,1200 advanced equipment, annual revenue $150 milliion. SJ has 18 production plants, 8 subsidiaries and several offices around the main oilfield in the world.The group owns high level R & D center and National Laboratories carrying out strategic cooperation with China University of Petroleum and other several scientific research institutes of SINOPEC. SJ has obtained more than 150 national patents.The products have been exported to U.S.A, Canada, Peru, Ecuador, Venezuela, India, Saudi Arabia, Oman, Bahrain,  Iran,Turkmenistan,Kazakhstan,Russia,Sudan,etc.Shengji is Sinopec, CNPC, CNOOC, Shell, Chevron, GE, Schlumberger, Haliburton, Weatherford excellent supplier.

API 5CT Oilfield J55 2 3/8 EUE Tungsten Plating TubingAPI 5CT Oilfield J55 2 3/8 EUE Tungsten Plating TubingAPI 5CT Oilfield J55 2 3/8 EUE Tungsten Plating Tubing

Partner

API 5CT Oilfield J55 2 3/8 EUE Tungsten Plating Tubing 

Contact

API 5CT Oilfield J55 2 3/8 EUE Tungsten Plating Tubing 

 

API 5CT Oilfield J55 2 3/8 EUE Tungsten Plating TubingAPI 5CT Oilfield J55 2 3/8 EUE Tungsten Plating TubingAPI 5CT Oilfield

J55 2 3/8 EUE Tungsten Plating TubingAPI 5CT Oilfield J55 2 3/8 EUE Tungsten Plating TubingAPI 5CT Oilfield J55 2 3/8 EUE Tungsten Plating TubingAPI 5CT Oilfield J55 2 3/8 EUE Tungsten Plating Tubing

在线客服系统